Precautions for the installation of copper-aluminum transition joints

The copper-aluminum transition joint and the bottom valve need to be installed in a vertical manner, and the flow between the media is carried out in a bottom-up manner. Straight-through and elevating copper-aluminum transition joints need to be installed on horizontal pipelines. The installation position of the swing-type copper-aluminum transition joint is not subject to any restriction. Of course, the installation process is usually carried out in a horizontal manner, of course, it can also be installed on a horizontal or inclined pipeline. The copper-aluminum transition joint is installed at the bottom of the pump. Of course, you need to pay attention to the flow direction of the medium during the installation process. The indicator mark of the valve body should be consistent with the direction of the medium flow, otherwise it will easily cause the medium flow to be disturbed.