Whether the selection of hydraulic oil pipe joints is suitable or not has a great impact on the entire machine. If the selected joints are not suitable, it may affect daily use, and there may also be some safety hazards, so it is necessary when selecting Strictly pay attention, remember the following points, teach you how to choose hydraulic oil pipe joints?
1. Pressure from both parties
When selecting a joint, it is necessary to match the additional working pressure and the pressure that is eliminated by itself, so that the selected joint will be suitable and avoid affecting the normal use of the machine during the working process.
2. The inner diameter of the joint
Generally speaking, the inner diameter of hydraulic oil pipe joints is between 5-7.5m/s, and the maximum inner diameter cannot exceed 10m/s. According to this range, the inner diameter of the hose can be determined, and it can also be used as a reference when selecting it. If it is ensured that the operation is clear and unobstructed, the total length of the high-pressure hose will continue to shrink, and the maximum limit cannot exceed 30m.
3. The length of the hose
For a single hose, choose slightly longer joints, but the length of a single hose should not be less than 5m, otherwise it will affect the normal use of the joint.
4. It is consistent with the high pressure of the machine
Because the high-pressure hose joint meets the mechanical strength, the flow area and shape will be the same as the hose. At this time, you can choose an extremely fast joint to avoid some influence.
