Hydraulic quick couplings are designed for special heavy loads. The material of the female joints is chrome-plated steel. The lock sleeves of the male joints and the female joints are hardened, with good pressure resistance and fatigue resistance: two-stage sealing, no leakage: with safety Lock function.
This kind of joint is a kind of joint that does not need to use tools, but also can realize the rapid assembly and disassembly of pipelines. It has two structures: open and closed at both ends and open at both ends.
The open-close quick joint at both ends is composed of a joint body, a check valve core, a jacket, a steel ball, a spring, and a seal. The inner cavity of the joint body has a one-way valve. When the two joint bodies are separated, the check valve core extends under the action of their respective springs and presses against the tapered hole of the joint body to close the passage. , The oil in the pipes on both sides is enclosed in the pipe and cannot flow out; when the two joint bodies are connected, the two ejector rods at the front end of the check valve core collide, forcing the valve core to leave the tapered hole of the joint body, so that the The oil is communicated, and the two joint bodies are locked by steel balls. When working, the jacket presses the steel balls into the U-shaped groove of the joint body under the action of the spring to connect the joint bodies.
This kind of joint is easy to disassemble, but the structure is more complicated, the local resistance loss is large, and it is suitable for the pipeline system with oil and gas as the medium.
The difference between the open-ended quick connector at both ends and the open-closed type at both ends is that there is no one-way valve in the inner cavity of the joint, and the passage cannot be closed when the two joint bodies are separated. One end of the joint is connected to the hose by a three-part hose joint, and the joint core of the hose joint is directly inserted into the quick joint.
