1. The rotary joint should avoid impact and fall during the handling and storage process, so as not to damage the interface and internal parts.
2. Install the machine as concentric as possible to ensure the good operation of the rotary joint.
3. When installing the threaded rotary joint, pay attention to whether the thread directions of the inner and outer pipes correspond to the direction of rotation of the drum, and the thread directions of the inner and outer pipes should also be the same.
4. The connection between the rotary joint and the pipeline must be connected by a hose (our company recommends the use of a metal hose with good interference), and rigid connections are absolutely prohibited.
5. The inlet and outlet of the rotary joint should be directly connected with the hose as much as possible. In order to reduce the auxiliary weight of the joint, extend the service life.
6. Assemble the inner tube, pay attention to the matching of dimensions and the auxiliary support of weight. It is recommended to use H8/e7 tolerance matching for the inner tube of the internal rotary joint and the joint.
7. The support and rotation stop of the rotary joint should be appropriate. Generally, the diameter of the rod should be 2mm smaller than the rotation stop hole, so as not to affect the free adjustment and compensation of the rotary joint. For rotary joints and equipment
